1.75'' I-14G eGciniweyo yePosi yoKhuseleko lweNdlela yoKhuseleko lweSikwele
- Indawo yemvelaphi:
- Hebei, China
- Igama lebrand:
- HB JINSHI
- Igama lemveliso:
- IiPosti zeSayini yoKhuseleko lweTrafikhi eGcinisiweyo
- Izinto:
- Q235(SJ235R)
- Ubungakanani:
- 13/4" x 13/4",2" x 2" ,21/4" x 21/4",21/2" x 21/2"
- Ubude:
- Customized
- Ubume:
- Isikwere
- Ukutyeba kweendonga:
- 12ga, 14ga
- 5000 Iqhekeza / amaqhekeza ngosuku
- Iinkcukacha zokuPakisha
- Iipaliti
- Izibuko
- eTianjin, eTshayina
- Umzekelo woMfanekiso:
-
- Ixesha lokukhokhela:
-
Ubuninzi (Amaqhekeza) 1 - 1000 >1000 Est.Ixesha (iintsuku) 5 Kuya kuthethathethwana
Iposti yentsimbi yeNgxoxo eGalvanized
Iinkcukacha
IZINTO
I-Tubing ene-plain finish iqengqiwe ukusuka kwi-12 gauge (0,105 USS Gauge) kunye ne-14 gauge (0,075 USS Gauge) intsimbi eshushu egobileyo, Q235b.Ukugqitywa kwegalvanized, i-avareji encinci yamandla esivuno emva kokubumba okubandayo yi-60 000 psi.
GALVANIZATION
Ukufakwa kwegalari kuya kuhambelana neenkcukacha zeASTM A653 G90 (275g/m²).I-Corner weld igqunywe nge-zinc emva kokusebenza kwe-scarfing.
UKUNYAMEZELA
Ukunyamezela ukutyeba kodonga:
Umahluko ovumelekileyo kubunzima bodonga yi + 0,011, -0,005 intshi.
| Ukunyamezela kubungakanani:Umda oqhelekileyo wangaphandle (ii-intshi) | Unyamezelo lwangaphandle kuwo onke macala kwiikona (ii-intshi) |
| 1¾” x 1¾” | ± 0,008 |
| 2 "x 2" | ± 0,008 |
| 2¼”x 2¼” | ± 0,010 |
| 2½” x 2½” | ± 0,01 |
| Ubukhulu bamacala kunye nokujijwa: Umda wangaphandle oqhelekileyo (ii-intshi) | Unyamezelo lwesikweri (intshi*) | Ukujija kuvumelekile kwiifithi ezi-3 (intshi**) |
| 1¾” x 1¾” | ± 0,010 | 0.062 |
| 2 "x 2" | ± 0,012 | 0.062 |
| 2¼”x 2¼” | ± 0,014 | 0.062 |
| 2½” x 2½” | ± 0,015 | 0.075 |
* I-tubing inokuba namacala ayo asilele ukuba yi-90 ° enye kwenye ngonyamezelo oludwelisiweyo.
**I-twist ilinganiswa ngokubamba ezantsi udini lwesinye isiphelo setyhubhu yesikweri kwipleyiti yomphezulu enecala elisezantsi lombhobho elinxusene nepleyiti yomphezulu kwaye uphawule ubude ukuba nokuba yiyiphi ikona kwelinye icala lecala elisezantsi lingaphezulu ipleyiti yomphezulu.
I-convexity kunye ne-concavity:Ukulinganisa kumbindi wecala elisicaba, ukunyamezela yi-±0,010 intshi esetyenziswa kubungakanani obuthile obumiselwe ekoneni.
Ukunyamezela ngokuthe tye:Ukwahluka okuvumelekileyo kokuthe tye yi-1/16” kwiinyawo ezi-3.
ITelesikophu:Ukusebenzisa i-12 gauge okanye i-14 gauge yesikwere ityhubhu, iityhubhu zobungakanani obulandelelanayo ziyakucocwa iigawuji zokugalela izibilini kwaye ziya kubonelelwa ngokukhululekileyo kangangeenyawo ezilishumi.
Ukunyamezela umngxuma:Ukunyamezela kubungakanani bomngxuma yi-± 1/64 "kwi-7/16" yobungakanani bomngxuma.Ukunyamezela kwisithuba semingxuma yi-± 1/8” kwienyawo ezilishumi.
1. Ngaba unokunikela ngesampulu yasimahla?
UHebei Jinshi unokukunika isampuli yasimahla ekumgangatho ophezulu
2. Ngaba ungumenzi?
Ewe, besisoloko sibonelela ngeemveliso zobungcali kwindawo yocingo iminyaka eyi-10.
3. Ndiyakwazi ukwenza iimveliso?
Ewe, ukuba nje ukubonelela ngeenkcukacha, imizobo inokwenza kuphela oko ufuna iimveliso.
4.Kunjani malunga nexesha lokuhambisa?
Ngokwesiqhelo phakathi kweentsuku ezili-15-20, iodolo elungiselelweyo inokufuna ixesha elide.
5. Kuthekani ngemiqathango yentlawulo?
T / T (kunye ne-30% yediphozithi), L / C ekuboneni.Uwestern Union.
Nayiphi na imibuzo, nceda uzive ukhululekile ukuqhagamshelana nathi.Siza kukuphendula kwiiyure ezisi-8.Enkosi!
