Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion
- Indawo yemvelaphi:
- Hebei, China
- Igama lebrand:
- IJINSHI
- Inombolo yoMfanekiso:
- JSWGB
- Izinto:
- I-Low-Carbon Iron Wire, ucingo lwentsimbi yekhathoni ephantsi, ucingo lwentsimbi oluyiGalvanized
- Uhlobo:
- I-Welded Mesh
- Isicelo:
- Gabions
- Imilo yomngxuma:
- Isikwere, isikwere
- Imbobo:
- 50x50mm 50x100mm
- Isilinganisi socingo:
- 3mm 4mm 5mm
- Igama lemveliso:
- Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion
- Umnatha:
- 50x50mm 75x75mm 50x100mm
- Ububanzi:
- 3mm 4mm 5mm
- Ubungakanani:
- 1x1x1m 1x2x1m
- Unyango lomphezulu:
- Ifakwe igalvanized okanye ipvc
- Ukupakisha:
- kwiPallet okanye kwibhokisi
- Tensile strength:
- 380-550 N/MM2
- Izibuko:
- Xingang
- 2000 iSeti/iSeti ngeVeki nganye
- Iinkcukacha zokuPakisha
- irajwe ngefilimu ecuthekileyo okanye epakishwe kwipalethi
- Izibuko
- XINGANG
Umzi-mveliso ngqo 5mm 75mmx75mm Galvanized welded gabion
1.Inkcazelo:
I-Welded Gabion yenziwe ngocingo lwentsimbi oluzotyiweyo olubandayo kwaye ihambelana ngokungqongqo neBS1052:1986 yamandla okuqina.Emva koko idityaniswe ngombane kunye kunye neHot Dip Galvanized okanye i-Alu-Zinc ifakwe kwi-BS443/EN10244-2, iqinisekisa ubomi obude.Iimeshes ke zinokuthi zigqunywe ipholima ephilayo ukukhusela umhlwa kunye nezinye iziphumo zemozulu, ngakumbi xa iza kusetyenziswa kwindawo enetyuwa kunye nokungcoliseke kakhulu.Umnatha wethu weAlu-Zinc* ugqunywe kusetyenziswa inkqubo yeGalfan.
Izinto ze-Welded Gabion ziyi-Hot dipped wire galvanized wire, i-Galfan wire.
Ubungakanani beBhokisi yeGabion | 0.5x1x1m | 1x1x1m | 1x1.5x1m | 1x2x1m |
Ububanzi bocingo | 3mm | 4mm | 5mm | 6mm |
Isimbo seingcingo ezithe tyaba ezimbini siyafumaneka | ||||
Ubungakanani beMesh Hole | 50x50mm | 50x100mm | 37.5x100mm | 75x75mm |
Ezinye iinkcukacha ziyafumaneka |
Iinkcazo eziqhelekileyoye welded gabion | ||
Umngxuma (cm) | Idayamitha yocingo(mm) | Ubungakanani bebhokisi yegabion(m) |
5×7 | 2.4 | 0.5×0.5×1 |
5×7 | 2.7 | 1×1×1 |
5×10 | 3.5 | 1×1×2 |
Ingcaciso engentla ingatshintshwa ngokoyilo lweprojekthi |
Isicelo:
1.)Ukukhutshwa kwezikhukula kunye nokuhamba kwelothe
2.)Iwawa likhusela
3.)Ukuthintela ukulahleka kwamanzi nomhlaba
4.)Ukukhusela ibhulorho
5.)Ukuqinisa ilaphu
6.)Iprojekthi yokubuyisela unxweme
7.)Iprojekthi yolwandle
8.)Block udonga
9.)Ukukhusela indlela
Ukuqhubela phambili kwebhokisi ye-gabion edityanisiweyo kunebhokisi ye-hex ye-gabion
1.Umnatha we-welding stone cage umphezulu umtyibilizi kwaye ucocekile, umnatha ofanayo, i-solder joint yomelele, inokomelela olomeleleyo, i-corrosion resistance, i-permeability kunye nemfezeko.
2. Wire gabion network ixabiso eliphantsi, kulula ukuyifaka, lolona khetho lufanelekileyo lomhombiso wegadi, ukukhuselwa kwamahlathi kwi-slope.
3. Kukho ukunyamezela okunamandla umonakalo wendalo kunye nokukwazi ukuxhathisa impembelelo yemozulu embi
4. Ufakelo lweeyure zokusebenza zocingo oludityanisiweyo lwegabion kunehexagon yehexagon yelitye lomnatha longe i-40%.Xa kuthelekiswa nehexagonal wire gabion mesh, i-welded wire gabion mesh inokugcina "ikheji" ngcono.Xa isihluzi sizaliswe ngocingo oludityanisiweyo lwe-gabion mesh panel convex concave, gcina umcaba, ungafani nomnatha wehexagon wekheji yelitye, ukuze ndikwazi ngcono
Ngokuqhelekileyo ukupakisha kwi-pallet okanye njengesicelo sakho.
1. Uyiodola njani i-Welded Gabion yakho?
a) Idayamitha kunye nobungakanani bemesh.
b) qinisekisa ubungakanani bomyalelo
c) imathiriyeli kunye nodidi lwetratement yomphezulu
2. Ixesha lokuhlawula
a) TT
b) LC EKUBENI
c) imali
d) I-30% ixabiso loqhagamshelwano njengediphozithi, i-blance 70% ihlawulwe emva kokufumana ikopi ye-bl.
3. Ixesha lokuhambisa
a) Kwiintsuku ezingama-19-25 emva kokuba ufumene idiphozithi yakho.
4. Yintoni i-MOQ?
a) Iiseti ezili-10 njenge-MOQ, sinokuvelisa isampuli kuwe.
5.Ungakwazi ukubonelela ngeesampuli?
a) Ewe, singakunika iisampuli zasimahla
1. Ngaba unokunikela ngesampulu yasimahla?
UHebei Jinshi unokukunika isampuli yasimahla ekumgangatho ophezulu
2. Ngaba ungumenzi?
Ewe, besisoloko sibonelela ngeemveliso zobungcali kwindawo yocingo iminyaka eyi-10.
3. Ndiyakwazi ukwenza iimveliso?
Ewe, ukuba nje ukubonelela ngeenkcukacha, imizobo inokwenza kuphela oko ufuna iimveliso.
4.Njani malunga nexesha lokuhambisa?
Ngokwesiqhelo phakathi kweentsuku ezili-15-20, iodolo elungiselelweyo inokufuna ixesha elide.
5. Kuthekani ngemiqathango yentlawulo?
T / T (kunye ne-30% yediphozithi), L / C ekuboneni.Uwestern Union.
Nayiphi na imibuzo, nceda uzive ukhululekile ukuqhagamshelana nathi.Siza kukuphendula kwiiyure ezisi-8.Enkosi!